top of page
Search

Ignition Repair Cost in Miami: What to Expect in 2026

Writer: Elain Hernández Lee
Elain Hernández Lee
3 days ago
10 min read

Locksmith inspecting a car ignition in Kendall

Most ignition jobs in Miami-Dade land between about $100 and $600, and the final number depends on three things: whether the cylinder can be repaired or has to be replaced, whether your key needs to be cut and programmed again, and when you call. A mobile locksmith comes to your car in Kendall, so you don’t pay for a tow, and you can get a firm quote before work begins if you give the vehicle’s year, make, model and VIN.

 

This guide explains what each kind of ignition job costs, why two quotes for the same car can differ by hundreds of dollars, and what to have ready when you call so the price you hear is the price you pay.



TL;DR

 

  • Rekeying an ignition is the cheapest fix, around $100 according to J.D. Power’s locksmith pricing guide. Full cylinder replacement costs more.

  • Our own ignition cylinder guide puts a mobile locksmith repair or swap at typically $200 to $600 or more, depending on the vehicle.

  • A new key or fob is often a separate line on the bill. Our published range for car key replacement is $95 to $500.

  • An ignition coil is a different part from the ignition switch. Coil work is mechanic work and has its own price range.

  • To get an accurate quote, have your year, make, model, VIN and proof of ownership ready, and say whether any key still works.

 

Table of Contents

 

 

What ignition repair costs in Miami and Kendall

 

There is no single price for “ignition repair,” because the phrase covers several different jobs. Here is how they compare. Figures are typical ranges, not quotes, and your car’s make and model can move them.

 

Job

Typical range

Source

Rekey the ignition cylinder

about $100

Extra copies of the same key

$30 to $50 each

Mobile locksmith ignition repair or swap

$200 to $600 or more

Car key replacement (our published range)

$95 to $500

Ignition coil replacement (a separate part)

$150 to $400 at independent shops

CarParts.com

The range is wide for a reason. A worn cylinder on an older domestic car and a cylinder with an immobilizer chip on a late-model import are not the same job, even though both get called an ignition repair. The sections below explain what pushes you toward the low end or the high end.

 

Repair, rekey or replace: three different jobs

 

When a key sticks, won’t turn or won’t come out, the locksmith’s first task is to work out which of three repairs fits. That choice sets most of the bill.

 

Repair the cylinder

 

The ignition cylinder is the lock your key slides into. It holds small wafers and springs that match the cuts on your key. If the problem is debris in the keyway, worn wafers or springs, or a key that is bent or was copied from an already worn original, the cylinder can often be cleaned, re-pinned or repaired without replacing it. This is the least expensive route after a simple rekey.

 

Rekey the cylinder

 

Rekeying changes the internal parts so a new key works and the old key stops working. It makes sense after lost or stolen keys, after buying a used car, or after a break-in. J.D. Power lists ignition rekeying at about $100. The price rises if the car has a transponder (chip) key, because the new key then also has to be programmed to the car.

 

Replace the cylinder

 

Replacement is for a cracked housing, a broken internal part, or damage from forced entry or tampering. It costs more because you pay for a new cylinder and for cutting and programming keys to match it. Our guide lists a broken key fragment stuck in the cylinder, an immobilizer warning light on the dash, or an engine that cranks and then dies as situations that need a professional right away.

 

If you are not sure which one you need, a locksmith can usually tell from a short description of the symptoms and the car. You can read the full breakdown in our ignition cylinder repair guide.

 

Ignition coil or ignition switch: don’t mix them up

 

Part of the confusion around this keyword comes from the word “ignition” meaning two things.

 

  • Ignition switch and cylinder: the lock and electrical switch you turn with a key. This is locksmith work.

  • Ignition coil: a part under the hood that turns the 12-volt battery power into the high voltage a spark plug needs. Most modern cars use one coil for each cylinder of the engine, according to Samarins. A failing coil causes misfires and rough running, not a key that won’t turn.

 

If your key turns fine but the engine shakes or the check engine light flashes, you are likely looking at a coil or spark plug problem, which belongs to a mechanic. CarParts.com puts a single coil replacement at $150 to $400 at independent shops, starting near $150 on simple four-cylinder engines and rising past $700 when the coils are hard to reach or several need replacing. It also notes that dealer service departments charge 15 to 35 percent more than independent shops.

 

If your key sticks, won’t turn, spins freely, won’t come out, or the steering wheel stays locked, that is the ignition cylinder, and that is where we can help.

 

What makes the price go up or down

 

Six factors explain most of the difference between a $200 job and a $600 job.

 

  1. Make, model and year. Many cars from the late 1990s onward carry an immobilizer, a security chip that stops the engine from starting unless it recognizes your key. A cylinder swap on those cars also involves programming. Our immobilizer key programming guide explains how it works for 1996 to 2015 cars.

  2. Whether any key still works. Replacing a worn ignition with one working key in hand is simpler than an all-keys-lost job, where a key has to be made from scratch.

  3. Cylinder condition. A dirty or worn cylinder is a repair. A cracked or tampered one is a replacement.

  4. Parts. Aftermarket and original-equipment parts differ in price. CarParts.com cites $40 to $100 for aftermarket coils against $150 to $300 or more for premium or original parts, and the same logic applies to ignition parts.

  5. Key type. A basic metal key, a transponder key and a push-button smart fob are three different price tiers.

  6. Time of day. Night, weekend and holiday calls usually carry a surcharge. More on that below.

 

The key or fob is often the bigger line on the bill

 

Many drivers expect to pay for the ignition work and are surprised by the key. A replacement cylinder needs keys cut to match it, and on a chip-equipped car those keys must be programmed to the vehicle.

 

A public example shows how a key invoice builds up. CarsCounsel’s Honda guide reports that a dealer-installed replacement key typically costs $330 to $380, made up of a $250 to $300 fob plus $80 to $120 for programming. The same guide flags add-on lines worth reading on any invoice, such as a $15 to $20 VIN verification surcharge and a $20 to $30 diagnostic fee, and it suggests reviewing the invoice line by line. Those are Honda dealer figures from CarsCounsel, not a price list for every car, but they show why asking for an itemized quote matters.

 

Our published range for car key replacement is $95 to $500, which reflects the spread between a basic key and a smart fob. Programming is covered in more detail in our guides on car key programming and key fob programming. If you only need a spare, adding a key to your car can be much faster and cheaper than replacing everything after a loss.


The key or fob is often the bigger line on the bill

After-hours and emergency calls

 

Ignition trouble does not keep business hours. A key that snaps at 11 p.m. in a Kendall parking lot is a common call. Many locksmiths add an after-hours surcharge, and the amount depends on the provider and the hour. We keep an itemized breakdown for our service area in our guide to after-hours locksmith rates in Kendall West.

 

The best way to protect yourself is to ask for the total, including any night or weekend fee, before the technician drives out. A broken ignition can also lead to a bigger bill than planned, so it is a sensible moment to check how your policy treats vehicle damage and to compare car insurance costs in Florida.

 

How to get an accurate quote in Kendall

 

A locksmith can give you a firm number over the phone when you give the right details. Have these ready:

 

  • Year, make and model of the car.

  • VIN, the 17-character code on the driver-side dashboard near the windshield and on your registration. A VIN lets a locksmith identify the correct key blank and the programming your car needs.

  • Proof of ownership, such as your registration or title, and your photo ID. A legitimate locksmith asks for it before making a key or changing an ignition.

  • Symptoms: does the key go in, turn, come out? Is the steering wheel locked? Is a key fragment inside? Is a security or key light flashing?

  • How many keys work today, even if only one.

  • Where the car is. A mobile service comes to your driveway, workplace or parking spot, so you don’t need a tow.

 

Then ask for the price in writing or by text, split into service call, labor, parts, key and programming. A clear quote has no surprises when the technician arrives.

 

Can you get a key from the VIN alone?

 

In many cases a locksmith can use the VIN, plus the car’s lock, to make a new key without an original, as long as you can show you own the car. How long it takes and what it costs depends on the car’s key type, which is why the VIN is the first thing we ask for.

 

Signs your ignition needs attention now

 

Don’t wait for a no-start in a parking lot. Call about the ignition when you notice any of these:

 

  • The key is hard to insert or turn, or you have to jiggle it.

  • The key turns but the engine does not crank, or it cranks and then dies.

  • The steering wheel stays locked.

  • The key won’t come out, or part of it broke off inside.

  • The dashboard shows a security or immobilizer light.

  • The car stalls while the key is in the “on” position.

 

Catching a worn cylinder early often means a repair instead of a replacement. Florida heat and humidity are hard on keys and locks, and a worn key accelerates wear inside the cylinder. Replacing a worn key copy before it fails is a small cost compared with a cylinder replacement.

 

Our ignition repair service in Homestead and Kendall


Our ignition repair service in Homestead and Kendall

We are Progressive Locksmith, based at 23735 SW 114th Pl in Homestead, and we handle ignition repair and replacement, transponder key programming, key fob replacement and broken key extraction for cars across Miami-Dade, including Kendall, Cutler Bay and Homestead. Our service is available 24/7, we aim to reach you in 20 to 30 minutes, our technicians are licensed and insured, and we work in English and Spanish. We give upfront pricing so you know the total before work starts.

 

See our ignition repair and replacement page or our auto locksmith services, and call us with your vehicle details for a quote.


Progressive Locksmith - Cerrajero Miami

If you are locked out instead, see our car lockout service, where car lockouts are priced at $75 to $150.

 

Our view on ignition repair costs

 

Most people call us when the key has already stopped turning, and the first thing they ask is how much. Our answer is always the same: it depends on the cylinder and on the key, so we ask for your year, make, model and VIN first and give you the price before we drive out.   We built our service around being fast and clear. A car that won’t start is stressful, and you should not have to guess whether the total will be $100 or $600. Our goal is to reach you in 20 to 30 minutes, day or night, do the work where the car is parked, and explain what each line of the price covers.   Mobile ignition work also saves the tow and the wait. Because we repair, rekey and replace cylinders and program the key in the same visit, you leave with a car that starts, not a to-do list. And we speak English and Spanish, so every question gets a straight answer in the language you are most comfortable with.   Julio Borroto

 

FAQ

 

How much does it cost to rekey a car ignition?

 

J.D. Power lists rekeying the ignition at about $100 and rekeying automotive locks at $50 to $100. Cars with transponder keys cost more because the new key must also be programmed. Call us with your vehicle details for a quote.

 

How much does a locksmith cost in Miami?

 

It depends on the job. Our car lockout range is $75 to $150 and our car key replacement range is $95 to $500, while ignition work depends on the vehicle and is quoted after we hear the symptoms and VIN. Night and weekend calls can add a surcharge, so ask for the total first.

 

Can I get a new car key with my VIN number?

 

Often yes. A locksmith can use the VIN to identify the right key and programming for your car, and you will need to show proof of ownership and photo ID. Give us your VIN when you call and we will tell you what your car needs.

 

Is an ignition coil the same as an ignition switch?

 

No. The switch and cylinder are the lock and electrical switch your key operates. The coil is an engine part that feeds the spark plug. A key that won’t turn points to the cylinder, while misfires and rough running point to the coil.

 

Do I need a tow if my ignition fails?

 

Usually not. A mobile locksmith works at your car’s location, whether that is a driveway in Kendall or a parking lot in Homestead, so you can avoid towing costs in most cases.

 

Sources

 

Recommended

 

 
 
 

Comments


CALL US

Phone: (786) - 419-0315 

             

EMAIL US

SERVICE HOURS

24 / 7

AREAS SERVED

SERVICES

CONTACT US

Miami, FL
Miami Shores, FL
Key Biscayne, FL
Kendall, FL
Pinecrest, FL
North Miami, FL
Cutler Bay, FL
Doral, FL
Homestead, FL
Coral Gables, FL
Miami Beach, FL
Miami Springs, FL
Hialeah, FL
Palmetto Bay, FL

- Car Locksmith

- Residential Locksmith

- Commercial Locksmith

 

Phone: (786) - 419 - 0315

 Email: julioenrique111@gmail.com

Address

 23735 SW 114th Pl, Homestead, FL 33032

  • Facebook
  • Instagram

© 2007  Julio Borroto - Progressive Locksmith con Wix.com

bottom of page